Anyang ST pneumatic forging hammer is a self-contained power hammer with no need for extra compressor air supply, more solid casting frame integrated air channel, longer ram design keep top die out of cylinder always, all functions can be realized through press pedal, more powerful and low noisy, world-famous electronic and easy to be maintained by users, it’s a wonderful power hammer for blacksmith or blade maker.
ST-40 Blacksmith power hammer is designed for the forging of hot metal, forging material should be full heated before forging, or it will greatly reduce the life of the hammer. The 40 kg hammer strikes 245 beats per minute which moves the material efficiently and much faster than by hand on the anvil. Thanks to 40 Kg Anyang ST Power Hammer Widely Used In Blacksmith Shop you can forge effectively up to about 50 mm rod.
1. Longer ram design. Longer ram design than other hammers allows the top die to keep out of the cylinder that makes changing dies easier, and the dies with holes allow installing DIY forging tools.
2. SOLID FRAME CASTING. Anyang ST pneumatic forging hammer casting frame more solid than fabricated. Thickness and weight will be more 30-40% than others.
3. Customized colors allowed. Anyang ST power hammer accepts customized color requirements to help buyers get their wishes.
4. Stainless hardware. Make the machine in shining without rust.
5. The base raises the hammer to a suitable height. All hammers are equipped with a casting or fabricated base to lift the hammer’s working surface with the height of 950 mm over ground.
6. Low noisy and clean air. Anyang ST hammer allows the installation of air filters to reduce oil contented in the air in the workshop and reduce working noise.
7.Shaft pin bushing working life 2-3 times than others. Anyang ST uses alloy steel bushing more wear-resistant than bronze material used by others.
8. Schneider electronic. We use Schneider electrical apparatus element to make sure hammer running safety.
Ram Weight: 40kg/88lbs
Hitting frequency: 245/min
Distance of dies: 245mm
Throat deep: 270mm
Motor: three phase/4Kw
Total weight: 1450 Kg.
Anyang ST power hammer is designed for blacksmith and blade maker in forging works of wrought-iron, furniture, knife, kitchenware, horseshoe, iron door, forged stockade, farm tools, iron lights etc.
Anyang ST supports 7*24 online service for pre-sales consultation, power hammer information introduction, selection advice, quotation, order progress tracking, test running, ship booking etc. All machines will be attached with a detailed manual explaining the working principle, safe operation, hammer structure, lubrication, maintenance troubleshooting, wearing parts list, etc.
We also provide free lifelong online after-sales service for all of Anyang ST machines, and prepare all replace parts in stock.
